Electronic three-way electric control valve
Electronic three-way electric control valve
Nominal diameter: DN25 ~ 300mm
Nominal pressure: PN0.6 ~ 6.4MPa
Main material: WCB (ZG230-450), ZG1Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti CF8 CF8M
Suitable medium: liquid, gas, steam and other media
Drive: electric
Design criteria: GB / T17213
Inspection standards: GB / T4213
Flange standard: JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113, HG20594-97, HG20618-97, etc.
First, an electronic three-way control valve overview
Electronic
three-way electric control valve with high precision, stable and
reliable operation and so on. The confluence type is mainly used to mix
two fluids into a third fluid; the split type is mainly used to divide
one fluid into two fluids. This product can replace the two single-and
double-seat switch valves, which are used for the regulation and control
of liquids, gases, steam and other media.
Second, the electronic three-way valve main technical parameters and performance indicators
By
the PS series and 3610 series of straight-stroke electric actuator and
low flow resistance through the single seat valve. (Also can be equipped
with other brands of straight-line Cheng executive body). Electric
actuator for the electronic integration structure, with a servo
amplifier, the input control signal (4-20mADC or 1-5VDC) and the power
to control the valve opening, to pressure, flow, level, temperature and
other parameters adjust. With sensitive action, simple connection, large
flow, small size, high regulation accuracy. Control accuracy and
performance than the DKZ type has significantly improved.
Third, the three-way electronic control valve regulating agencies the main technical parameters
Nominal diameter mm | confluence | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
Shunt | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
Seat diameter mm | 26 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
Rated flow coefficient kv | confluence | 8.5 | 13 | 21 | 34 | 53 | 85 | 135 | 210 | 340 | 535 | 800 | 1260 |
Shunt | 8.5 | 13 | 21 | 34 | 53 | 85 | 135 | 210 | 340 | 535 | 800 | 1260 | |
Nominal pressure (MPa) | 0.6, 1.6, 2.5, 4.0, 6.4 | ||||||||||||
Travel (mm) | 16 | 25 | 40 | 60 | 100 | ||||||||
Flow characteristics | straight line | ||||||||||||
Operating temperature ℃ | -40 ~ 230 ℃ (room temperature type), heat sink 230 ~ 450 ℃ (medium temperature), special order -100 ~ 600 ℃ | ||||||||||||
Flange size | In line with JB78-59, JB79-59 standards, according to JB / 79.1-94, JB, ANSI, JIS, DIN and other standard production orders | ||||||||||||
Body material | WCB (ZG230-450), ZG1Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti CF8 CF8M | ||||||||||||
Spool material | 1Cr18Ni9, SS304, Cr18Ni12Mo2Ti, SS316, ZG1Cr18Ni9Ti | ||||||||||||
Body type | Three-way two-seat cast ball valve | ||||||||||||
On the bonnet type | Ordinary (room temperature), heat sink (medium temperature), long neck (low temperature) | ||||||||||||
Equipped with electric actuator | PSL | PSL-202 | PSL-204 | PSL-208 | PSL-312 | PSL325 | |||||||
361L | 361LSA-20 | 361LSB-30 | 361LSB-50 | 361LSC-65 | 361LSC-99 | ||||||||
Explosion-proof | 361LXA-20 | 361LXB-30 | 361LXB-50 | ||||||||||
Note:
1, Users can provide ANSI, JPI, JPI and other countries Flange
standard products, the flange according to the user needs to determine.
2, the working temperature, nominal pressure, nominal diameter beyond
the scope of the list of products can contact with the company.
Fourth, the electronic three-way valve actuator main technical parameters
model | Rated output force N | Speed mm / s | Technical Parameters | ||||
PSL | 361L | PSL | 361L | PSL | 361L | PSL | 361L |
201 | 361LSA-08 | 1000 | 800 | 0.25 | 4.2 | Power: AC220V 50Hz | Power: AC220V 50Hz |
202 | 361LSA-20 | 2000 | 2000 | 0.50 | 2.1 | ||
204 | 361LSB-30 | 4500 | 3000 | 0.50 | 3.5 | ||
208 | 361LSB-50 | 8000 | 5000 | 1.00 | 1.7 | ||
312 | 361LSC-65 | 12000 | 6500 | 0.60 | 2.8 | ||
325 | 361LSC-99 | 25000 | 10000 | 1.0 | 2.0 | ||
Fifth, electronic three-way valve performance indicators
project | Index value | ||
Basic error% | ± 2.5 | ||
Backlash% | 2.5 | ||
dead zone% | 1.0 | ||
Always point deviation% | Electricity | Start point | ± 2.5 |
end | ± 2.5 | ||
Power off | Start point | ± 2.5 | |
end | ± 2.5 | ||
Adjustable range | 30: 1 | ||
Rated travel deviation% | 2.5 | ||
Allowable discharge L / H | Meet the JB / T7387-94 Class IV less than the rated capacity of 10-4 | ||
Six, electronic electric three-way valve to allow pressure
Nominal diameter mm | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
Allowable pressure difference MPa | 3.32 | 2.20 | 2.20 | 1.41 | 1.38 | 0.94 | 0.61 | 0.51 | 0.36 | 0.20 | 0.19 | 0.13 |
Note: The actual configuration needs to be based on specific process parameters. If the allowable differential pressure is clear or the maximum allowable working pressure is outside the range of the list, please contact us and take the appropriate method to solve it.
Seven, electronic electric three-way control valve dimensions
Public Path (mm) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||
L (mm) | PN1.6MPa | 185 | 200 | 220 | 250 | 275 | 300 | 350 | 410 | 450 | 550 | 640 | 740 | |
PN4.0MPa | 190 | 210 | 230 | 255 | 285 | 310 | 355 | 425 | 460 | 560 | 660 | 760 | ||
PN6.4MPa | 200 | 210 | 235 | 265 | 295 | 320 | 370 | 440 | 475 | 570 | 670 | 770 | ||
H1 (mm) | PN1.6MPa | 140 | 150 | 160 | 180 | 200 | 220 | 220 | 256 | 278 | 322 | 465 | 580 | |
PN4.0MPa | 150 | 160 | 170 | 190 | 220 | 232 | 256 | 295 | 313 | 372 | 474 | 585 | ||
PN6.4MPa | 160 | 170 | 180 | 200 | 220 | 242 | 266 | 300 | 318 | 382 | 474 | 585 | ||
With PSL | H (mm) | normal type | 775 | 781 | 775 | 790 | 819 | 820 | 810 | 917 | 927 | 947 | 1252 | 1545 |
Heat sink type | 905 | 911 | 905 | 920 | 766 | 983 | 973 | 1116 | 1126 | 1144 | 1805 | 1825 | ||
D (mm) | 176 | |||||||||||||
Weight (KG) | 61.5 | 64.5 | 69.5 | 76.5 | 109 | 132 | 164 | 207 | 267 | 395 | 430 | 480 | ||
With 361L | H (mm) | normal type | 538 | 544 | 660 | 675 | 744 | 745 | 735 | 972 | 982 | 1027 | 1204 | 1265 |
Heat sink type | 668 | 674 | 790 | 805 | 691 | 908 | 898 | 1171 | 1181 | 1224 | 1440 | 1502 | ||
D (mm) | 225 | 310 | ||||||||||||
Weight (KG) | 69 | 72 | 85 | 92 | 124 | 147 | 179 | 260 | 320 | 448 | 627 | 780 | ||
Note: The nominal diameter of less than 80 shunt valve using the same diameter instead of the confluence valve.
 |  Shandong Hugong Valve Manufacturing Co., Ltd.  91, Zhongnan High-tech Yuandu Huizhi Industrial Park, Taixiang Street and Wenhua Road, Weifang Economic Development Zone, Shandong +86-15963678999 sdhgfm@163.com |  |
Copyright ? Shandong Hugong Valve Manufacturing Co., Ltd.
Record number: No. 18000630-1 Lu ICP
